KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
- 1.1. Short acquaintance to the car
   1.2. Keys
   1.3. Locks of doors
   1.4. Immobilizer
   1.5. Electric window regulators
   1.6. Seats
   1.7. Seat belts
   1.8. Back seat belts
   1.9. Safety cushions
   1.10. Components of system of safety cushions
   1.11. Control lamp of a safety cushion
   1.12. Luggage carrier door (5-door model)
   1.13. Trunk lid
   1.14. Lamp of a luggage compartment
   1.15. Cowl
   1.16. Hatch of a fuel tank
   1.17. Steering wheel
   1.18. Rear-view mirrors
   1.19. Illumination of salon
   1.20. Salon equipment
   1.21. Digital watch
   1.22. Shtorka of a luggage carrier
   1.23. Power supply socket
   1.24. Aerial
   1.25. The hatch in a roof
   1.26. The holder for sunglasses
   1.27. Cargo luggage grid
   1.28. Top luggage carrier
   1.29. Ignition switch
   1.30. Engine start-up
   1.31. Mechanical transmission
   1.32. Automatic transmission
   1.33. Brake system
   1.34. Parking brake
   1.35. Hydraulic amplifier of a steering
   1.36. Adjustable steering column
   1.37. Combination of devices
   1.38. Headlights
   1.39. Turn indexes
   1.40. Proof-reader of light of headlights
   1.41. Illumination of a day mode of operation
   1.42. Back antifog lamps
   1.43. Screen wipers and stekloomyvatel
   1.44. Heater of back glass
   1.45. Heater of an external rear-view mirror
   1.46. Heating and ventilation system
   1.47. System work
   1.48. Information on plates
   1.49. Alarm light system
   1.50. Engine start-up from the storage battery of other car
   1.51. Safety locks
   1.52. Memory safety lock
   1.53. Car towage
   1.54. Screen wiper brushes
   1.55. Replacement of lamps
   1.56. Care of appearance of the car
   1.57. Maintenance
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


1.30. Engine start-up

PERFORMANCE ORDER
1. Be convinced that the parking brake is switched on.
Models with a mechanical transmission
2. Completely press a coupling pedal, and the lever of gear shifting establish in the situation NEUTRAL. During start-up of the engine hold a pedal of coupling of the completely pressed. The starter will not work for some models, if the pedal of coupling is not completely pressed.
Models with an automatic transmission
2. Move the lever of switching of modes to the situation "R" (parking). Completely press a brake pedal.
It is also possible to start up the engine if the lever of switching of modes is in the situation "N" (neutral).
3. Turn the ignition key in the situation START and keep it in this situation while the engine will not be started up (but not more long 10 c), then a key release. At extremely low surrounding temperatures,–18 °C or if the engine did not work within several days before departure are lower warm up the engine without pressing an accelerator pedal. Regardless of, whether the engine warm or cold is, at its start-up do not press an accelerator pedal.

Prevention

If during movement the engine at model with an automatic transmission decayed, and the car thus continues to move, do not try to move the lever of switching of modes to the situation "R" (parking). If it will be possible on traffic conditions on the road, move the lever of switching of modes to the situation "N" (neutral), and then turn the ignition key in the situation START (Ignition) and try to start up the engine again.


The cold engine (temperature of cooling liquid lower than 0 °C) is not started up

Difficulties in operation of the engine can be caused by overflow of cylinders (in cylinders there is very many fuel). In this case execute the following:

PERFORMANCE ORDER
1. Be convinced that the parking brake is switched on.
Models with a mechanical transmission
2. Completely press a coupling pedal, and the lever of gear shifting establish in the situation "Neutral". During start-up of the engine hold a pedal of coupling of the completely pressed.
Models with an automatic transmission
2. Rearrange the lever of switching of modes in the situation "R" (parking) or "N" (neutral). Completely press a brake pedal.
3. Against the stop press a pedal of an accelerator and keep it in this situation.
4. Turn the ignition key in the situation START and keep it in this situation (at most 10 c). At the same time hold pressed an accelerator pedal. In such a way will pump out excessive fuel from engine cylinders.
5. As soon as the engine will be started up, frequency of rotation of a cranked shaft of the engine will sharply increase. Thus at once release a pedal of an accelerator and the ignition key.
6. If the engine was not started up yet, after its provorachivaniye a starter release an accelerator pedal.
7. Try to start up once again the engine, without pressing an accelerator pedal, having turned the ignition key in the situation START (it is maximum on 10 c).

The hot engine is not started up:

If there are difficulties at start-up of the hot engine (repeated attempts without pressing of a pedal of an accelerator did not crown success), execute the following:

PERFORMANCE ORDER
1. Be convinced that the parking brake is switched on.
Models with a mechanical transmission
2. Completely press a coupling pedal, and the lever of gear shifting establish in the situation "Neutral". During start-up of the engine hold a pedal of coupling of the completely pressed.
Models with an automatic transmission
2. Move the lever of switching of modes to the situation "R" (parking) or "N" (neutral). Completely press a brake pedal.
3. Press approximately to a course half an accelerator pedal, turn the ignition key in the situation START and keep it in this situation (at most 10 c).
4. After start-up of the engine let's to it work on frequency of rotation of idling approximately during 10 with, and then can begin movement.

Prevention

Do not include a starter for a while bigger, than 10 pages. If the engine decays then or is not started up at all, before the following inclusion of a starter wait for 5-10 pages. The overload or misuse of a starter can cause its damage.


The starter will not work for some models if:

      – at models with an automatic transmission the mode "R" (parking) or "N" (neutral) is not included;

      – at models with a mechanical transmission the coupling pedal is not pressed completely.

If the engine did not work for a long time, at its start-up the knock published by pushers of valves can be audible. This sound should stop, when the engine will heat up to working temperature. If knock did not stop, the car should pass technical control at authorized dealer Kia.