KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. Coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. Casing of coupling and press disk
   7.8. Replacement of the central bearing
   7.9. Coupling pedal
   7.10. Coupling cable
   7.11. Bearing of switching off of coupling
   7.12. Fork of switching off of coupling \squeezing lever
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


7.11. Bearing of switching off of coupling

Removal

PERFORMANCE ORDER
1. Remove a transmission.
2. Turn out a bolt of fastening of a fork of switching off of coupling.
3. Remove the bearing of switching off of coupling.

Check


Prevention

The bearing of switching off of coupling is tight. It cannot be washed out in solvent.


PERFORMANCE ORDER
1. Check a condition of the bearing of switching off of coupling which should rotate easily, evenly and silently and in it should be absent люфт. The working surface of the bearing influencing a press spring should be smooth, without cracks, local corrosion or development.
2. It is possible to define the faulty bearing of switching off of coupling without removing it from the car for what it is necessary to press a coupling pedal at the working engine. If by pressing of a pedal of coupling there is an additional noise, means, the bearing of switching off of coupling is faulty and it is necessary to replace it.

Installation

PERFORMANCE ORDER
1. Apply a thin film XG greasings - 1-C on the following places:

      – a sliding surface on a support of the bearing of a transmission;
      – a fork of switching off of the coupling, contacting to the bearing;
      – the forward party of the bearing of switching off of the coupling, contacting to a diafragmenny spring.

Prevention

Fill with greasing only deepenings and remove superfluous greasing. If superfluous greasing remains in the plug, it can lead to greasing hit on frictional slips that will lead to violation of functioning of coupling.


2. Fill deepening in the plug of the bearing of switching off of coupling with XG greasing - 1-C. Also apply a thin film greasings on a contact surface of a fork of switching off of coupling.
3. Establish the bearing of switching off of coupling.

4. Establish a fork of switching off of coupling and fix it a bolt. Tighten a bolt the demanded moment.

Inhaling moment: 35–41 N • m

5. Establish a transmission.