KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
- 16. Electric equipment
   16.1. Specifications
   16.2. Electric chains
   + 16.3. Generator
   + 16.4. Storage battery
   16.5. Starter
   16.6. Check at a provorachivaniye of a cranked shaft not the heated-up engine
   16.7. Check of an electric chain of the traction relay
   16.8. Check of the traction relay
   16.9. Check of brushes and shchetkoderzhatel
   16.10. Check of coils of a stator
   16.11. Rotor check
   16.12. Removal and starter installation
   16.13. Starter repair
   16.14. Multipurpose switch
   16.15. Sound signal
   16.16. The block of safety locks and the relay, established in car salon
   16.17. Check of the relay of the activator of the lock of a door
   16.18. Check of the switch of adjustment of provision of an external rear-view mirror
   16.19. Check of the activator of provision of an external rear-view mirror
   16.20. Check of the engine of a window regulator
   16.21. Check of a heater of back glass
   16.22. Repair of a current-carrying strip of a heater
   16.23. Engine of a screen wiper of a windscreen
   16.24. Stekloomyvateli
   16.25. Adjustment of light of headlights
   16.26. Adjustment of light of fog lights
   16.27. Safety cushions (SRS)
   16.28. Precautionary labels
   16.29. Safety cushion of the driver and spiral wire
   16.30. Safety cushion check
   16.31. Check of a spiral wire (spring)
   16.32. Safety cushion of the forward passenger
   + 16.33. Electric circuits


Хрусталика и, щелевые лампы.

16.14. Multipurpose switch

GENERAL INFORMATION

Removal and installation

At removal of the multipurpose switch on the cars equipped with a safety cushion of the driver, observe special precautions.


Prevention

Do not assort or repair the block of a safety cushion and a spiral wire.

Do not throw and do not strike a safety cushion and a spiral wire, and also exclude their kontaktirovaniye with water, lubricant or oil. In the presence of dents, cracks, deformations or rusts replace a safety cushion and a spiral wire.

Transport a safety airbag separately, a bag up. Have no on a safety cushion extraneous subjects which safety cushions at expansion can put serious traumas.

At transportation do not place a hand on a safety cushion.

Do not subject a safety cushion to influence of temperature above 93 °C.

After safety cushion operation surely replace a spiral wire.

At a detachment of the socket of a spiral wire do not apply excessive efforts.

The removed safety cushion should be stored in a pure, dry place.

Before installation of a spiral wire combine a label and the Neutral indicator and establish forward wheels for movement directly forward. Establish a spiral wire on a steering column. If the label and the indicator is not combined properly, at turn the steering wheel will not turn on a full corner or the mechanism of a spiral wire therefore functioning of a safety cushion of the driver will be broken will be broken.


Check

Check conductivity between contacts of the socket of the multipurpose switch at operation of the switch.

Lighting switch


Lighting switch

HU: driving beam of headlights
HL: passing beam of headlights
P: self-returnable situation

Turn switch


Screen wiper and stekloomyvatel switch