since 2000 of release

Repair and car operation

If tire replacement on an aluminum rim and use of steel tools, for an exception of damage of a disk is carried out, between a disk and the tool lay a rubber protective insert.
Work carry out on a rubber mat, instead of on a firm surface.

Installation and repair of tires demands the special tool and professional skills. Professionals should carry out these works only.

+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
- 11. Wheels and tires
   11.1. Specifications
   11.2. Recommendations about replacement of tires
   11.3. Check of pressure of air and condition of tires
   11.4. Palpation of wheels
   11.5. Shift of wheels
   11.6. Balancing of wheels
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment

11.2. Recommendations about replacement of tires


Pay attention to the following recommendations about removal and installation of tires on rims.

Be careful, that at installation not to damage an internal lateral surface of a rim of a wheel or external edge of an internal lateral surface of a seat of the tire.

Wire brush or emery paper clear all rust and/or dirt from an internal lateral surface of a rim of a wheel.

Cleaning of aluminum rims carry out with use of only a soft fabric.

Remove from a tire protector everything extraneous subjects, such as pebble, glass splinters, nails etc.

Check correctness of installation of the gate.

For check of tightness use soap solution.