KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
- 6. Ignition system
   6.1. Specifications
   6.2. Work of system of ignition
   6.3. Components of system of ignition
   6.4. Corner of an advancing of ignition
   6.5. Ignition coil
   6.6. Spark plugs
   6.7. High-voltage wires
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


6.7. High-voltage wires

Check

PERFORMANCE ORDER
1. Disconnect high-voltage wires from candles and ignition coils.
2. Clear and check integrity of isolation of high-voltage wires.
3. Check internal surfaces of contacts of high-voltage wires on absence of corrosion or a deposit.
4. By an ohmmeter measure resistance of high-voltage wires.

Resistance: 4,48–6,72 kiloohms/m

5. In the presence of any defect replace a high-voltage wire.