KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
- 3. Greasing system
   3.1. Specifications
   3.2. Check of pressure of engine oil
   3.3. Replacement of engine oil
   3.4. Replacement of the oil filter
   3.5. Oil pump
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


3.2. Check of pressure of engine oil

PERFORMANCE ORDER
1. Disconnect the socket and turn out the sensor of pressure of oil from the block of cylinders.
2. In openings for installation of the sensor screw the manometer union.
3. Start up the engine and warm up it to working temperature.

4. At frequency of rotation of a cranked shaft of the engine 3000 of mines-1 read the pressure shown by a manometer.

Pressure of oil: 294–392 kPas

5. If pressure differs from demanded value find out the reason and carry out repair.
6. Turn out the union of a manometer and screw into place the sensor of pressure of oil.

Inhaling moment: 12–18 N • m