KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
- 3. Greasing system
   3.1. Specifications
   3.2. Check of pressure of engine oil
   3.3. Replacement of engine oil
   3.4. Replacement of the oil filter
   3.5. Oil pump
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


3.4. Replacement of the oil filter

PERFORMANCE ORDER
1. Lift the car.
2. A special key turn out the oil filter. If the rubber sealing ring of the oil filter remained on the block of cylinders, remove it.
3. Grease with a thin layer of pure engine oil a rubber sealing ring of the new oil filter.
4. Screw the oil filter before contact of a sealing ring of the oil filter with the block of cylinders.
5. Tighten the filter on 11/6 turns.
6. Start up the engine and check absence of leakages of oil.
7. Switch off the engine and wait for 5 mines for oil running off in the pallet. Check level of engine oil and, if necessary, finish it to norm.

Capacity of the oil filter: 0,2 l