KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
- 10. Suspension bracket
   10.1. Specifications
   10.2. Check of elements of a forward suspension bracket
   10.3. Check and adjustment of corners of installation of wheels
   10.4. Convergence of forward wheels
   10.5. Rack of a forward suspension bracket
   10.6. Bottom lever of a forward suspension bracket
   10.7. Forward stabilizer of cross-section stability
   10.8. Beam of a back suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


10.2. Check of elements of a forward suspension bracket

GENERAL INFORMATION

Cylindrical spring


If position of the car concerning a paving normal, means springs have no defects. In the presence of a distortion of the car replace the corresponding spring.

Racks

For check of serviceability of racks of forward and back suspension brackets serially press each corner of a body of the car and sharply release it. If the body comes back to a starting position without raskachivaniye, the rack means is serviceable.

Examine racks on lack of podtekaniye of liquid. Insignificant moistening of a rack – the normal phenomenon.

Check a condition of the top plug of a back rack. For this purpose lift a back part of the car so that the plug of a back rack completely unloaded, thus the back wheel should stand on the earth.

Any even insignificant люфт plugs testifies to its wear and need of replacement.

Bottom lever of a forward suspension bracket

Check the following places and restore or replace the bottom lever:

      – reliability of a tightening of bolts and nuts;
      – existence of deformation or cracks in the bottom lever.

Longitudinal draft of a forward suspension bracket

Check the following places and restore or replace longitudinal draft:

      – reliability of a tightening of bolts and nuts;
      – wear or damage of rubber plugs.