Repair and Kia Rio car operation - 12.9. Pumping of hydraulic system of the amplifier of a steering//Rio KIA since 2000 / arhitekt-proekt.ru

KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
- 12. Steering
   12.1. Specifications
   12.2. A steering without the hydraulic amplifier
   12.3. Check of the helmsman management without the hydraulic amplifier
   12.4. A steering column without the hydraulic amplifier
   12.5. A steering with the hydraulic amplifier
   12.6. Check of pressure of liquid in hydraulic system
   12.7. Check of effort of turn of a steering wheel
   12.8. Check of level of liquid
   12.9. Pumping of hydraulic system of the amplifier of a steering
   12.10. Belt of a drive of the pump of the amplifier of a steering
   12.11. Steering transfer with the amplifier of a steering
   12.12. Pump of the amplifier of a steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment





12.9. Pumping of hydraulic system of the amplifier of a steering

PERFORMANCE ORDER
1. Check that level of liquid is between MAX and MIN labels being on case of a transparent tank.
2. Lift a forward part of the car and fix on support.
3. At the idle engine turn a steering wheel from an emphasis against the stop several times.
4. Check liquid level. If level of liquid went down, add liquid.
5. Repeat steps 2 and 3 while level of liquid is not stabilized.
6. Start up the engine and leave to work at frequency of rotation of idling.
7. Turn a steering wheel from an emphasis against the stop several times.
8. Check that liquid does not foam and its level did not go down.
9. If necessary add liquid and repeat steps 7 and 8.