KIA RIO

since 2000 of release

Repair and car operation

Rio KIA
+ 1.1. Short acquaintance to the car
- 2. Engines A3E, A5D
   2.1. Specifications
   2.2. Compression check
   2.3. Camshafts
   2.4. Pistons and rods
   2.5. Cranked shaft
   2.6. Verification of shatunny and radical loose leaves
   2.7. Air filter (ACL)
   2.8. Accelerator cable
   2.9. Head of the block of cylinders
   2.10. Check of valves
   2.11. Check of a saddle of the valve
   2.12. Check of a spring of the valve
   2.13. Gear belt
   2.14. System of production of the fulfilled gases
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment

2.12. Check of a spring of the valve

PERFORMANCE ORDER

1. Examine each spring of the valve on lack of cracks and damages.

2. Measure length of a spring in a free condition. Establish a spring on a flat horizontal surface and measure a deviation of the top part of a spring from the vertical plane.

Spring of the valve, mm		A5D	A3E
Length of a spring in a free condition	The nominal	43,1	45,5
Length of a spring in a free condition	The minimum	42,9	45,3
Deviation of the top part of a spring from the vertical plane	The maximum	1,13	1,19