Repair and Kia Rio car operation - 2.14. System of production of the fulfilled gases//Rio KIA since 2000 / arhitekt-proekt.ru

KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
- 2. Engines A3E, A5D
   2.1. Specifications
   2.2. Compression check
   2.3. Camshafts
   2.4. Pistons and rods
   2.5. Cranked shaft
   2.6. Verification of shatunny and radical loose leaves
   2.7. Air filter (ACL)
   2.8. Accelerator cable
   2.9. Head of the block of cylinders
   2.10. Check of valves
   2.11. Check of a saddle of the valve
   2.12. Check of a spring of the valve
   2.13. Gear belt
   2.14. System of production of the fulfilled gases
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment





2.14. System of production of the fulfilled gases

GENERAL INFORMATION

System of production of the fulfilled gases

1–main exhaust silencer;
2–openings for bolts of fastening of flanges, 37–52 N • m;
3–preliminary exhaust silencer;
4–connecting flange And;
5–openings for bolts of fastening of flanges, 37–52 N • m;
6–a connecting flange In;
7–reception exhaust pipe;
8–bolts of fastening of an arm, 37–52 N • m;
9–arm fastening to a reception exhaust pipe, 21–27 N • m;
10-bolt, 37–52 N • m;
11-catalytic converter;
12-hairpins of fastening of catalytic converter, 37–52 N • m

Removal

PERFORMANCE ORDER
1. Remove a reception exhaust pipe.
2. Remove catalytic converter.
3. Remove preliminary and main exhaust silencers.

Installation

Installation is carried out to sequences, return to removal, taking into account the following.

Establish a reception exhaust pipe as follows:

PERFORMANCE ORDER
1. Establish a connecting flange And and temporarily fix it.
2. Establish an arm In and temporarily fix it.
3. Tighten bolts of fastening of a connecting flange And the moment of 37-52 N • m.
4. Check arm connection In and pipes.
5. Tighten bolts of fastening of an arm During the moment of 37-52 N • m.