KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. Cooling liquid
   4.3. Replacement of cooling liquid
   4.4. Water pump
   4.5. Radiator
   4.6. Check of tightness of system of cooling
   4.7. Engine of the fan of a radiator
   4.8. Check of a cover of a radiator
   4.9. Valve of return pressure
   4.10. Thermostat
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


4.5. Radiator

GENERAL INFORMATION

Sequence of removal of a radiator

1–radiator;
2–radiator arm;
3–radiator hose;
4–hose of a broad tank;
5–socket of the fan of a radiator;
6–radiator fan;
7–hose of an oil radiator;
8–radiator hose.

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove a zabornik of fresh air.
3. Merge cooling liquid in the suitable container.
4. Remove all details in the sequence shown in drawing.

Check

PERFORMANCE ORDER
1. Check a radiator on lack of cracks, damages and absence of leaks.
2. Check on lack of pognuty plates of a radiator. If necessary, using a hairbrush, straighten platinum.
3. Check a condition of entrance and target branch pipes of a radiator.

Installation

PERFORMANCE ORDER
1. Installation is carried out to sequences, return to removal.
2. Connect a wire to the negative plug of the storage battery.
3. Fill in in cooling system necessary amount of demanded cooling liquid.
4. Start up the engine and check absence of leaks from cooling system.