KIA RIO

since 2000 of release

Repair and car operation


Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. Cooling liquid
   4.3. Replacement of cooling liquid
   4.4. Water pump
   4.5. Radiator
   4.6. Check of tightness of system of cooling
   4.7. Engine of the fan of a radiator
   4.8. Check of a cover of a radiator
   4.9. Valve of return pressure
   4.10. Thermostat
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment

4.7. Engine of the fan of a radiator
GENERAL INFORMATION

Sequence of removal of the fan of a radiator
1–socket of the fan of a radiator;
2–bolt, 7,8–11 N • m;
3–casing of the fan of a radiator; 		4–radiator fan;
5–engine of the fan of a radiator.

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Merge cooling liquid in the suitable container.
3. Remove a zabornik of fresh air.
4. Disconnect the socket from the engine of the fan of a radiator.
5. Weaken a collar and remove the top hose of a radiator.
6. Turn out two top bolts of fastening of a casing of the fan of a radiator.
7. Turn out two bottom bolts of fastening of a casing of the fan of a radiator.
8. Lift and remove a casing of the fan of a radiator from a motor compartment.
9. Turn out a nut and remove the radiator fan.
10. Turn out three bolts and nuts and remove the engine of the fan of a radiator.

Installation

Installation is carried out to sequences, return to removal.