KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. Transmission
   - 8.1. Mechanical transmission
      8.1.1. Specifications
      8.1.2. Check of level of oil
      8.1.3. Oil replacement
      8.1.4. Replacement of an oil sealing ring
      8.1.5. Removal and transmission installation
      8.1.6. Dismantling, check and transmission assembly
      8.1.7. Case of coupling and components of a case of a transmission
      8.1.8. Primary shaft of a transmission
      8.1.9. Secondary shaft of a transmission
      8.1.10. Choice of adjusting laying
      8.1.11. Differential
      8.1.12. Gear shifting mechanism
   + 8.2. Automatic transmission of F4E-K
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment





8.1.12. Gear shifting mechanism

GENERAL INFORMATION

Gear shifting mechanism

1–handle of the lever of gear shifting;
2–ashtray;
3–central panel;
4–back console;
5–forward console;
6–cover;
7–arm of the lever of gear shifting;
8–draft of gear shifting;
9–draft of a choice of transfers;
10-gear shifting lever;
11-spring;
12-top hemisphere;
13-plug;
14-bottom hemisphere;
15-cover;
16-rubber support.

Repair

PERFORMANCE ORDER
1. Dismantling carry out in the sequence designated by figures in drawing.
2. Check a condition of all details and, if necessary, replace them.
3. Assembly is carried out to sequences of return to removal.

Installation of draft of a choice of transfers

PERFORMANCE ORDER
1. Establish draft of a choice of transfers for the car bottom, then on a transmission. Tighten nuts of fastening of draft of a choice of transfers to a transmission.

Inhaling moment: 31–46 N • m

2. Tighten nuts of an arm of the lever of gear shifting the demanded moment.

Inhaling moment: 5,8–8,8 N • m

Spring installation

PERFORMANCE ORDER
Be convinced that the spring end with a hook is established properly in arm deepening, as is shown in drawing.