KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. Transmission
   - 8.1. Mechanical transmission
      8.1.1. Specifications
      8.1.2. Check of level of oil
      8.1.3. Oil replacement
      8.1.4. Replacement of an oil sealing ring
      8.1.5. Removal and transmission installation
      8.1.6. Dismantling, check and transmission assembly
      8.1.7. Case of coupling and components of a case of a transmission
      8.1.8. Primary shaft of a transmission
      8.1.9. Secondary shaft of a transmission
      8.1.10. Choice of adjusting laying
      8.1.11. Differential
      8.1.12. Gear shifting mechanism
   + 8.2. Automatic transmission of F4E-K
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


8.1.3. Oil replacement

PERFORMANCE ORDER
1. Lift the car and fix it in horizontal situation.

Prevention

At check of level of oil the car should be in horizontal situation.


2. Turn out a stopper the oil plum, located in an end face of a transmission and merge oil in the suitable container.

Inhaling moment: 40–58 N • m
3. Establish on a stopper a new washer and screw a stopper oil plum into place.
4. Through an opening for installation of the mechanism of a drive of a speedometer fill in in a transmission necessary amount of demanded oil.

Oil:
Grade: GL-4
Viscosity: SAE 75W-90
Capacity: 2,80 l

5. Start up the engine and leave it to work before oil warming up in a transmission. Check absence of leakages of oil from a transmission.
6. Lower the car.