Rio KIA - 1.1. Short acquaintance to the car 1.2. Keys 1.3. Locks of doors 1.4. Immobilizer 1.5. Electric window regulators 1.6. Seats 1.7. Seat belts 1.8. Back seat belts 1.9. Safety cushions 1.10. Components of system of safety cushions 1.11. Control lamp of a safety cushion 1.12. Luggage carrier door (5-door model) 1.13. Trunk lid 1.14. Lamp of a luggage compartment 1.15. Cowl 1.16. Hatch of a fuel tank 1.17. Steering wheel 1.18. Rear-view mirrors 1.19. Illumination of salon 1.20. Salon equipment 1.21. Digital watch 1.22. Shtorka of a luggage carrier 1.23. Power supply socket 1.24. Aerial 1.25. The hatch in a roof 1.26. The holder for sunglasses 1.27. Cargo luggage grid 1.28. Top luggage carrier 1.29. Ignition switch 1.30. Engine start-up 1.31. Mechanical transmission 1.32. Automatic transmission 1.33. Brake system 1.34. Parking brake 1.35. Hydraulic amplifier of a steering 1.36. Adjustable steering column 1.37. Combination of devices 1.38. Headlights 1.39. Turn indexes 1.40. Proof-reader of light of headlights 1.41. Illumination of a day mode of operation 1.42. Back antifog lamps 1.43. Screen wipers and stekloomyvatel 1.44. Heater of back glass 1.45. Heater of an external rear-view mirror 1.46. Heating and ventilation system 1.47. System work 1.48. Information on plates 1.49. Alarm light system 1.50. Engine start-up from the storage battery of other car 1.51. Safety locks 1.52. Memory safety lock 1.53. Car towage 1.54. Screen wiper brushes 1.55. Replacement of lamps 1.56. Care of appearance of the car 1.57. Maintenance + 2. Engines A3E, A5D + 3. Greasing system + 4. Cooling system + 5. Fuel system + 6. Ignition system + 7. Coupling + 8. Transmission + 9. Axes and power shafts + 10. Suspension bracket + 11. Wheels and tires + 12. Steering + 13. Brake system + 14. Body + 15. Air central air + 16. Electric equipment
|
Ventilation
PERFORMANCE ORDER |
1. Establish the handle of a choice of a mode in situation. |
2. Establish the handle of supply of air in demanded situation. |
3. Establish the handle of a regulator of temperature in demanded situation. |
4. Establish the handle of a regulator of frequency of rotation in the fan demanded situation. |
|
Heating
PERFORMANCE ORDER |
1. Establish the handle of a choice of a mode in situation. |
2. Establish the handle of supply of air in demanded situation. |
3. Establish the handle of a regulator of temperature in demanded situation. |
4. Establish the handle of a regulator of frequency of rotation of the fan in demanded situation |
5. If it is necessary to warm salon and at the same time to reduce humidity of air, turn on the conditioner. |
6. If it is necessary that at level of the person there was a cold air, include two-level work, having transferred the handle of a choice of a mode to situation. |
7. If the windscreen misted over, transfer the handle of a choice of a mode to situation. |
|
Conditioner
All central airs of cars of KIA are filled with the coolant of R134a which is not rendering an adverse effect on environment and not destroying an ozone layer of the atmosphere.
PERFORMANCE ORDER |
1. Make engine start-up. Press the air conditioning button. |
2. Establish the handle of a choice of a mode on an obverse position. |
3. Establish the handle of absorption of air on supply of external or retsirkuliruyemy air. |
4. Establish the handle of a choice of temperature on demanded a position |
5. Establish the handle of a regulator of frequency of rotation of the fan in demanded situation. |
6. Make setup of handles of management by the fan and temperature for maintenance of the maximum comfort. If it is necessary that at level of a floor there was a warm air, include two-level work, having transferred the handle of a choice of a mode to situation 027 and establish the handle of a regulator of temperature so that the maximum comfort was reached. If it is necessary to reach the greatest possible cooling, turn the handle of a regulator of temperature to the full to the left, the button of a choice of a mode – in the provision of a retsirkulyatsiya of air, and the handle of a regulator of frequency of rotation of the fan establish for the maximum speed. |
Prevention
If air central air is included, at movement on lifting or slow movement in a dense steam of cars, often supervise temperature of cooling liquid of the engine. Included central air can cause an engine overheat. If the index of temperature signals about an engine overheat, further it is possible to leave included only ventilation, having switched off thus the conditioner.
|
|
Defrosting, elimination of a zapotevaniye of a windscreen
Windscreen inside
PERFORMANCE ORDER |
1. Establish a position of heating of a floor (floor-defrost) or simply a position of heating (defrost). |
2. If at present conditioning or supply of external fresh air is not required, press the corresponding button for cancellation of these functions. |
3. Establish the demanded temperature. |
4. Establish demanded frequency of rotation of the fan, except for a position "0" (zero). |
5. Air conditioning joins automatically at installation of a position of supply of external (fresh) air. |
Prevention
Do not use this situation at the working conditioner and very damp weather. The difference of temperatures of external air and a windscreen can lead to a zapotevaniye of glasses and, therefore, decrease in visibility.
|
|
External surface of a windscreen
PERFORMANCE ORDER |
1. Establish simply a position of heating (defrost). |
2. Establish the fan handle on a position "3" or "4". |
3. Establish temperature on a position of the maximum warmth. |
4. Air conditioning joins depending on the found size of temperature of air and supply of external (fresh) air is established. If at present conditioning or supply of external fresh air is not required, press the corresponding button for cancellation of these functions. |
5. For the purpose of achievement of maximum efficiency of elimination of an icing of a windscreen turn the handle of a regulator of temperature to the full to the right – on the maximum temperature, and the handle of a regulator of frequency of rotation of the fan establish for the maximum speed. If it is necessary for elimination of an icing / zapotevaniye of a windscreen to a floor warm air moved, establish a mode regulator in this situation. |
6. Before the beginning of a trip it is necessary to remove all snow and ice from wind and back glasses, external rear-view mirrors and all lateral windows. Remove all snow and ice from a cowl and an airintaking lattice of ventilation on a cowl to reach maximum efficiency of heating of a windscreen and to reduce probability of its icing and a zapotevaniye. |
|
How to cancel function of compulsory air conditioning and a position of supply of external (fresh) air at the included position of heating of a floor and simple heating (floor-defrost and defrost)
If you choose Floor-Defrost or Defrost position, the system automatically includes air conditioning and there is a choice of a position of supply of external (fresh) air.
If you use at present one of the above-stated modes and do not need the conditioned or external fresh air, you can switch off system work as follows:
– establish a regulator of management of frequency of rotation of the fan on a position 0 (zero); – turn the handle of installation of a mode in the provision of heating 030; – press the button of a retsirkulyatsiya of air 031 not less than 5 times on 3 pages. After that the light indicator of the button of a retsirkulyatsiya of air blinks 3 times in 0,5 – second intervals.
If it is necessary to renew work of automatic central air of air and supply of external (fresh) air, carry out identical procedure.
Arrive in the identical way if it is necessary to return on a position of compulsory supply of external (fresh) air at engine start-up. |
|