KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. Coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. Casing of coupling and press disk
   7.8. Replacement of the central bearing
   7.9. Coupling pedal
   7.10. Coupling cable
   7.11. Bearing of switching off of coupling
   7.12. Fork of switching off of coupling \squeezing lever
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment





7.12. Fork of switching off of coupling / squeezing lever

Removal

PERFORMANCE ORDER
1. Remove a transmission.
2. Turn out a bolt of fastening of a fork of switching off of coupling.
3. Remove the bearing of switching off of coupling.
4. Remove a returnable spring of the squeezing lever.
5. Move squeezing the lever up from a fork of switching off of coupling and remove a fork.
6. Take squeezing the lever from a coupling case.
7. Remove plugs of the squeezing lever from a coupling case.

Installation


Prevention

Fill internal deepening in the plug with XG greasing - 1-C.


PERFORMANCE ORDER
1. Establish plugs of the squeezing lever.
2. Establish the bearing of switching off of coupling.
3. Insert a fork of switching off of coupling and establish squeezing the lever.
4. Establish a returnable spring of the squeezing lever.
5. Combine openings under a bolt in a fork of switching off of coupling and a shaft of the squeezing lever.

6. Screw a bolt of fastening of a fork of switching off of coupling and tighten it the demanded moment.

Inhaling moment: 35–41 N • m

7. Establish a transmission.