KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. Coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. Casing of coupling and press disk
   7.8. Replacement of the central bearing
   7.9. Coupling pedal
   7.10. Coupling cable
   7.11. Bearing of switching off of coupling
   7.12. Fork of switching off of coupling \squeezing lever
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment





7.2. Adjustment of a pedal of coupling

PERFORMANCE ORDER

1. A hand press a coupling pedal before emergence of notable resistance and measure size of a free wheeling.

Free wheeling of a pedal: 9–15 mm

2. Wring out squeezing the lever, separate from it a pusher and rotating an adjusting nut In adjust a gap And.

Gap And: 1,5–2,5 mm

3. After adjustment of a free wheeling press a pedal of coupling and measure distance from a forward surface of a pedal to a carpet.

Distance from a forward surface of a pedal to a carpet: 83,2 mm