KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. Coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. Casing of coupling and press disk
   7.8. Replacement of the central bearing
   7.9. Coupling pedal
   7.10. Coupling cable
   7.11. Bearing of switching off of coupling
   7.12. Fork of switching off of coupling \squeezing lever
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


7.4. Coupling disk

Removal


Prevention

Exclude hit of oil or any lubricant on frictional overlays of a disk of coupling, coupling work otherwise will be broken.


PERFORMANCE ORDER
1. Remove a transmission.
2. Note the mutual provision of a casing of coupling and a flywheel.

Prevention

Gradually on a diagonal weaken bolts of fastening of coupling assembled, turning each bolt on turn S until it will be terminated a diafragmenny spring and bolts can be unscrewed manually.


3. Remove a casing of coupling with a press disk and a coupling disk. For an exception of a provorachivaniye of a flywheel at a reversing of bolts establish the special tool ОК130 111 002 for flywheel blocking from a provorachivaniye.

Prevention

It is desirable to remove a flywheel and to check a back sealing ring of a cranked shaft on absence of leaks. If necessary replace a sealing ring.