KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Specifications
   7.2. Adjustment of a pedal of coupling
   7.3. Height of installation of a pedal of coupling
   7.4. Coupling disk
   7.5. Check of a casing of coupling with a press disk
   7.6. Check of a disk of coupling
   7.7. Casing of coupling and press disk
   7.8. Replacement of the central bearing
   7.9. Coupling pedal
   7.10. Coupling cable
   7.11. Bearing of switching off of coupling
   7.12. Fork of switching off of coupling \squeezing lever
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


7.3. Height of installation of a pedal of coupling

PERFORMANCE ORDER
1. Disconnect a coupling cable from the squeezing lever of a case of coupling to exclude influence of a cable on height of installation of a pedal.
2. Measure distance from a forward surface of a pedal to a carpet.

Height of installation of a pedal of coupling: 195 mm

3. If necessary adjust height of installation of a pedal of coupling.
4. Weaken a lock-nut And and rotating the switch of coupling establish the demanded height of installation of a pedal of coupling.
5. Tighten a lock-nut And.

Inhaling moment: 14–18 N • m