KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
- 9. Axes and power shafts
   9.1. Specifications
   9.2. Check of a condition of a protective cover
   9.3. Check of reliability of shlitsevy connection
   9.4. Replacement of a power shaft
   9.5. Repair of a power shaft
   - 9.6. Forward axis
      9.6.1. Check люфта bearings of forward wheels
      9.6.2. Rotary fist and nave of a forward wheel
      9.6.3. Bearing of a nave of a forward wheel
      9.6.4. Adjustment of a tightness of bearings of a nave of a forward wheel
   9.7. Back axis
   9.8. Adjustment of a tightness of bearings of a back wheel
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment





9.6.1. Check люфта bearings of forward wheels

PERFORMANCE ORDER

1. Lift the car and fix on support. Moving a wheel in the various directions define existence люфта bearings of a forward wheel.

Люфт bearings of a forward wheel: 0 mm

2. Manually, as soon as possible rotate a wheel and be convinced that the wheel rotates evenly and without extraneous noise.

Prevention

Do not mix люфт bearings with lyufty the spherical hinge of the bottom lever of a forward suspension bracket. At existence люфта bearings it is necessary to adjust a preliminary tightness of bearings.


3. Remove a wheel. Turn out bolts, remove a support of a forward brake and, without disconnecting from it a brake hose, a soft wire fix it on an amortization rack.
4. Establish a measuring tip of the indicator of hour type on an end face of a nave of a forward wheel and, moving a nave along an axis, measure люфт the bearing.

Axial люфт: 0 mm