KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
- 14. Body
   14.1. Inhaling moments
   14.2. Cowl
   14.3. Trunk lid
   14.4. Trunk lid hinge
   14.5. Door of a luggage compartment
   14.6. Gas-filled rack of support of a door of a luggage compartment
   14.7. Lock of a door of a luggage compartment
   14.8. External handle of a door of a luggage compartment
   14.9. Forward door
   14.10. Vlagozashchitnoye door consolidation
   14.11. Back door
   14.12. Dashboard
   14.13. Ceiling
   14.14. Lateral upholstery of a luggage carrier of five-door cars
   14.15. Back upholstery of a luggage carrier
   14.16. Top upholstery of a forward rack
   14.17. Bottom upholstery of the central rack
   14.18. Top upholstery of the central rack
   14.19. Upholstery of a back rack of four-door cars
   14.20. Upholstery of a back rack of five-door cars
   14.21. Upholstery of a forward door
   14.22. Overlay of a threshold of a forward door
   14.23. Upholstery of a back door
   14.24. Upholstery of a door of a luggage compartment
   14.25. Overlay of a threshold of a back door
   14.26. Back shelf
   14.27. Upholstery of an arch of a back wheel of four-door cars
   14.28. Upholstery of an arch of a back wheel of five-door cars
   14.29. Front bumper
   14.30. Rear bumper
   14.31. Forward seats
   14.32. Upholstery of a back of a forward seat
   14.33. Upholstery of a pillow of a forward seat
   14.34. Head restraint
   14.35. The leaning-back hinge of a forward seat
   14.36. Back sitting
   14.37. Seat belts
   14.38. Seat belts of a back seat
   14.39. Bracket of fastening of a back seat belt
   14.40. The distances designed on the plane, for check of distances between separate points of a body of the car
   14.41. The actual distances of check of distances between separate points of a body of the car
+ 15. Air central air
+ 16. Electric equipment


14.12. Dashboard

GENERAL INFORMATION

Dashboard

1–furnish of a combination of devices;
2–combination of devices;
3–central panel of furnish;
4–radio receiver;
5–ware box;
6–dashboard;
7–heater air line;
8–ventilation air line.

Removal

PERFORMANCE ORDER
1. Remove the central console.
2. Remove a safety cushion of the driver.
3. Remove a steering wheel, the switch of a signal of turn both the top and bottom casings of a steering column.
4. Turn out two bolts from both parties of a steering column which connect the dashboard and a steering column. Lower a steering column down.
5. Unscrew a nut of fastening of the handle of opening of the lock of a cowl and disconnect the handle from a cable of opening of the lock of a cowl.
6. Remove a combination of devices in the following order:

      – turn out three screws and remove furnish of a combination of devices;
      – turn out four bolts of fastening of a combination of devices;
      – disconnect the electric socket from a back part of a combination of devices.
7. Remove the central panel of furnish and the control panel heating and ventilation.
8. Remove a radio receiver in the following order:

      
turn out four screws of fastening of a radio receiver;
      – disconnect the electric socket from a back part of a radio receiver;
      – disconnect an aerial wire from a back part of a radio receiver;
      – remove a radio receiver.
9. Remove a ware box.

10. Turn out four bolts and uncover the left / right side T-shaped............

11. Turn out four bolts of fastening of the basis of the dashboard.
12. Disconnect all sockets connecting the dashboard and a plait of wires of the car.
13. Remove the dashboard.

Installation

PERFORMANCE ORDER
1. Establish the dashboard in the car. Before installation of the dashboard be convinced that the steering column is established correctly through T-shaped with a plait of wires. Otherwise the steering column cannot be correctly established.
2. Connect sockets of a plait of wires and the dashboard.
3. Screw four bolts of fastening of the left / right side of the basis of the dashboard.

Inhaling moment: 18–25 N • m

4. Screw four bolts of fastening of the left / right side T-shaped............

Inhaling moment: 18–25 N • m

5. Establish a ware box.
6. Establish a radio receiver in the following order:

      – connect an aerial wire to a back part of a radio receiver;
      – connect the electric socket to a back part of a radio receiver;
      – screw four screws of fastening of a radio receiver.
7. Establish the central panel of furnish and the control panel heating and ventilation.
8. Establish a combination of devices in the following order:

      – connect the electric socket to a back part of a combination of devices;
      – screw four bolts of fastening of a combination of devices;
      – screw three screws of fastening of furnish of a combination of devices.
9. Establish the handle of opening of the lock of a cowl.

10. Screw two bolts from both parties of a steering column which connect the dashboard and a steering column.

Inhaling moment: 18–26 N • m

11. Establish a steering wheel, the switch of a signal of turn both the top and bottom casings of a steering column.
12. Establish a safety cushion of the driver.
13. Establish the central console.
14. Connect a wire to the negative plug of the storage battery.