|
Front bumper
1–overlay of a bumper;
2–bolt;
|
3–foamy absorber of energy;
4–amplifier of a bumper. |
The front bumper consists of three parts: overlays of a bumper, foamy absorber of energy and amplifier of a bumper.
The slip is made of polypropylene. The foamy absorber of energy is made of expanded polystyrene.
The amplifier of a bumper is made of metal. The foamy absorber of energy is located between an overlay of a bumper and the amplifier.
Removal
| PERFORMANCE ORDER |
| 1. Remove headlights. |
|
2. Turn out two bolts and release four clamps of fastening of the top part of a bumper. |
| 3. Release four clamps from under a cover. |
| 4. Release four clamps of fastening of the basis of a bumper. |
|
5. Take aside a mudguard of an arch of the right wheel and turn out two screws of lateral fastening of a bumper. |
| 6. Turn out two bolts of fastening of the left arm of support of a bumper. |
| 7. Repeat operations on the right side of a bumper. |
| 8. Remove a bumper. |
|
Installation
| PERFORMANCE ORDER |
| Establish a front bumper in sequence, return to removal. Inhaling moment: 32–47 N • m
|
|
Check
| PERFORMANCE ORDER |
| Check an overlay of a front bumper on absence of damages and reliability of its fastening. |
|
|