KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
- 14. Body
   14.1. Inhaling moments
   14.2. Cowl
   14.3. Trunk lid
   14.4. Trunk lid hinge
   14.5. Door of a luggage compartment
   14.6. Gas-filled rack of support of a door of a luggage compartment
   14.7. Lock of a door of a luggage compartment
   14.8. External handle of a door of a luggage compartment
   14.9. Forward door
   14.10. Vlagozashchitnoye door consolidation
   14.11. Back door
   14.12. Dashboard
   14.13. Ceiling
   14.14. Lateral upholstery of a luggage carrier of five-door cars
   14.15. Back upholstery of a luggage carrier
   14.16. Top upholstery of a forward rack
   14.17. Bottom upholstery of the central rack
   14.18. Top upholstery of the central rack
   14.19. Upholstery of a back rack of four-door cars
   14.20. Upholstery of a back rack of five-door cars
   14.21. Upholstery of a forward door
   14.22. Overlay of a threshold of a forward door
   14.23. Upholstery of a back door
   14.24. Upholstery of a door of a luggage compartment
   14.25. Overlay of a threshold of a back door
   14.26. Back shelf
   14.27. Upholstery of an arch of a back wheel of four-door cars
   14.28. Upholstery of an arch of a back wheel of five-door cars
   14.29. Front bumper
   14.30. Rear bumper
   14.31. Forward seats
   14.32. Upholstery of a back of a forward seat
   14.33. Upholstery of a pillow of a forward seat
   14.34. Head restraint
   14.35. The leaning-back hinge of a forward seat
   14.36. Back sitting
   14.37. Seat belts
   14.38. Seat belts of a back seat
   14.39. Bracket of fastening of a back seat belt
   14.40. The distances designed on the plane, for check of distances between separate points of a body of the car
   14.41. The actual distances of check of distances between separate points of a body of the car
+ 15. Air central air
+ 16. Electric equipment


14.2. Cowl

GENERAL INFORMATION

Cowl

1–cowl hinge;
2–cowl;
3–vlagozashchitny strip;
4–the vlagozashchitny strip covered;
5–rubber emphasis;
6–cowl support;
7–cowl lock;
8–cable of opening of the lock of a cowl.

The cowl of alligator type opening from the forward party of the car and being locked standard double unlocking mechanism.

The handle of opening of the lock of a cowl is located on the left side in the bottom of the dashboard.

When opening the cowl turns on two hinges and is fixed in open situation by a support. Each hinge fastens two bolts to a body and two bolts to a cowl.

For adjustment of provision of a cowl it can move at the expense of the extended openings for bolts of fastening of hinges of a cowl.

The latch of a cowl can be adjusted in two planes for ensuring optimum position of the lock of a cowl and a shock plate.

Removal

PERFORMANCE ORDER
1. Open a cowl and fix it on a support.
2. Support a cowl so that it did not fall after a reversing of bolts of fastening of hinges.

Prevention

Removal of a cowl carry out with assistants.


3. Turn out four bolts of fastening of hinges of a cowl.
4. Remove a cowl support from a cowl.
5. Remove a cowl.

Installation

PERFORMANCE ORDER
1. Installation of a cowl is carried out to sequences, return to removal.
2. Tighten bolts of fastening of a cowl by hand.
3. Close a cowl.
4. Check gaps on cowl perimeter. If necessary, moving a cowl in the extended openings for bolts of fastening of a cowl, adjust the provision of a cowl so that gaps on perimeter were uniform and corresponded to demanded values. After adjustment of situation tighten bolts of fastening of a cowl.

Inhaling moment: 19–26 N • m

5. Check alignment of the lock mechanism and a shock plate of a cowl.
If necessary, weaken bolts and moving adjust the provision of a shock plate of a cowl.


Inhaling moment: 8–11 N • m