|
Trunk lid
1–cylinder of the lock of a luggage carrier;
2–trunk lid lock;
3–shock plate of a trunk lid;
4–spring of support of a trunk lid; |
5–trunk lid;
6–trunk lid hinge;
7–profilirovanny sealing strip. |
The trunk lid is attached to a body by two hinges. Two hinges are connected with each other by two springs and fixed by bolts. Springs help to open a trunk lid and support it in open situation.
The Profilirovanny sealing strip fixed on a ledge of a trunk lid, prevents course between a luggage carrier and a body.
The latch is attached in the center of the basis of a trunk lid. Adjustment of provision of a trunk lid is provided.
Removal
| PERFORMANCE ORDER |
| 1. Lift a trunk lid. |
Prevention
Removal of a trunk lid carry out with the assistant.
|
| 2. Support a trunk lid in open situation. |
| 3. Turn out four bolts of fastening of hinges of a trunk lid and uncover a luggage carrier. |
| 4. Remove a rubber emphasis of a trunk lid. |
|
Installation
Prevention
Installation of a trunk lid carry out with the assistant.
| PERFORMANCE ORDER |
|
1. Installation of a trunk lid is carried out to sequences, return to removal. |
| 2. By hand tighten bolts of fastening of hinges of a trunk lid. |
| 3. Close a trunk lid. |
|
4. Check, and if necessary, adjust the provision of a trunk lid of rather adjacent surfaces before a tightening of bolts. Inhaling moment: 9–13 N • m
|
| 5. Check mutual position of the lock of a trunk lid and a shock plate of the lock. If necessary, weaken bolts and moving a shock plate adjust its situation. Inhaling moment: 7–10 N • m
|
|
|