KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
- 14. Body
   14.1. Inhaling moments
   14.2. Cowl
   14.3. Trunk lid
   14.4. Trunk lid hinge
   14.5. Door of a luggage compartment
   14.6. Gas-filled rack of support of a door of a luggage compartment
   14.7. Lock of a door of a luggage compartment
   14.8. External handle of a door of a luggage compartment
   14.9. Forward door
   14.10. Vlagozashchitnoye door consolidation
   14.11. Back door
   14.12. Dashboard
   14.13. Ceiling
   14.14. Lateral upholstery of a luggage carrier of five-door cars
   14.15. Back upholstery of a luggage carrier
   14.16. Top upholstery of a forward rack
   14.17. Bottom upholstery of the central rack
   14.18. Top upholstery of the central rack
   14.19. Upholstery of a back rack of four-door cars
   14.20. Upholstery of a back rack of five-door cars
   14.21. Upholstery of a forward door
   14.22. Overlay of a threshold of a forward door
   14.23. Upholstery of a back door
   14.24. Upholstery of a door of a luggage compartment
   14.25. Overlay of a threshold of a back door
   14.26. Back shelf
   14.27. Upholstery of an arch of a back wheel of four-door cars
   14.28. Upholstery of an arch of a back wheel of five-door cars
   14.29. Front bumper
   14.30. Rear bumper
   14.31. Forward seats
   14.32. Upholstery of a back of a forward seat
   14.33. Upholstery of a pillow of a forward seat
   14.34. Head restraint
   14.35. The leaning-back hinge of a forward seat
   14.36. Back sitting
   14.37. Seat belts
   14.38. Seat belts of a back seat
   14.39. Bracket of fastening of a back seat belt
   14.40. The distances designed on the plane, for check of distances between separate points of a body of the car
   14.41. The actual distances of check of distances between separate points of a body of the car
+ 15. Air central air
+ 16. Electric equipment





14.5. Door of a luggage compartment

GENERAL INFORMATION

Door of a luggage compartment

1–handle;
2–door upholstery;
3–lock cylinder;
4–lock of a door of a luggage compartment;
5–shock plate;
6–gas-filled rack of support of a back door;
7–hinge;
8–external handle of opening of a door;
9–door of a luggage compartment;
10-profilirovanny sealing strip;
11-activator of the lock of a door of a luggage compartment.

The door of a luggage compartment is established on two hinges welded on a body and fixed by bolts to a door.
Gas-filled racks help to open a door of a luggage compartment and support it in open situation.

The latch is attached in the center of the basis of a door of a luggage compartment. Adjustment of provision of a door of a luggage compartment is provided.

The Profilirovanny sealing strip fixed on a ledge of a cover of a door, prevents course between a door and a body.

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Open a door of a luggage compartment.
3. Remove a sealing ring in the central part of a door for access to a hose of a washer of back glass.
4. Remove a spray of a washer of back glass and disconnect from it a hose.
5. Compress a clamp and release a connector of hoses.
6. Remove a spray hose from a connector of hoses.
7. Remove a spray hose.
8. Remove the bottom upholstery of a door of a luggage compartment.
9. Remove a lateral upholstery of a luggage compartment.

10. Turn out a bolt of fastening of a support of a seat belt and one screw of fastening of an upholstery of a back rack.

11. At removal of an upholstery of a back rack disconnect the electric socket.
12. Extend a plait of wires through an opening at doors of the luggage compartment, the goffered cover and a sealing ring.

Prevention

At removal of gas-filled racks the assistant should hold a door in open situation.


13. Support a door of a luggage compartment in open situation.
14. Turn out two bolts of fastening of a gas-filled rack.
15. Turn out on one bolt of fastening of a door to hinges, from two parties of a door.

Prevention

Removal of a door of a luggage compartment carry out with two assistants.


16. Turn out the remained two bolts of fastening of a door to hinges.
17. Remove a door of a luggage compartment from the car.

Installation

Installation of a door of a luggage compartment is carried out to sequences, return to removal. Tighten bolts of fastening of hinges the demanded moment.

Inhaling moment: 16–24 N • m

Adjustment

PERFORMANCE ORDER
1. Measure gaps of a door of a luggage compartment in sections A-and and V-in shown in drawing.
If gaps correspond to demanded values, tighten bolts of fastening of hinges to a door of a luggage compartment.
Otherwise execute the following adjustments in hinges:

      – move a door forward or back;
      – move the left or right side of a door;
      – turn a door clockwise or counter-clockwise;
      – move a door in any combination from the above-mentioned.

After adjustment tighten bolts of fastening of hinges the moment of an inhaling of 20 N • m
2. Repeatedly measure gaps of a door of a luggage compartment to be convinced that the door was not displaced at a tightening of bolts.
3. Measure a gap between a door of a luggage compartment and a rear bumper. If a gap too big, adjust it, moving wedges from each other. If a gap too small, adjust it, moving wedges to each other.