KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   5.1. Specifications
   5.2. Elements of fuel system
   5.3. Corner of an advancing of ignition
   5.4. Frequency of rotation of idling
   5.5. Sensor of a measuring instrument of a consumption of air
   5.6. Detonation sensor
   5.7. Sensor of provision of a butterfly valve
   5.8. Check of the main relay
   5.9. Check of the relay of the fuel pump
   5.10. Check of tension of forward and back warmed sensors of oxygen
   5.11. Check of forward and back warmed sensors of oxygen
   5.12. Pressure removal in fuel system
   5.13. Toplivoprovoda
   5.14. Activization of fuel system
   5.15. Check of residual pressure in fuel system
   5.16. Check of fuel pipelines
   5.17. Check of fuel nozzles
   5.18. Quick-detachable connections
   5.19. Fuel pump
   5.20. Fuel tank
   5.21. Check of system of ventilation of a case (PCV)
   5.22. Check of system of catching паров fuels
   5.23. Check of the valve of system of catching паров fuels
   5.24. Check of the valve of closing of the canister
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment










5.11. Check of forward and back warmed sensors of oxygen

PERFORMANCE ORDER
1. Switch off ignition.
2. Disconnect the socket of the sensor of oxygen.
3. Connect an ohmmeter between contacts 1 and 3 and measure resistance.

Resistance: 3–7 Ohm at 20°С

4. Otherwise, replace the oxygen sensor.

Inhaling moment: 30–49 N • m

5. Connect the socket to the oxygen sensor.

Removal

PERFORMANCE ORDER
1. Disconnect the socket from the warmed sensor of oxygen.
2. A special key turn out the sensor and remove it and a washer.

Installation

PERFORMANCE ORDER
1. Screw the oxygen sensor with a washer.

Inhaling moment: 30–49 N • m

2. Connect the socket to the oxygen sensor.