|
After pressure removal in fuel system, the fuel system should be made active to avoid a long provorachivaniye by a starter at engine start-up.
| PERFORMANCE ORDER |
|
1. An additional wire connect FUEL PUMP plugs (the fuel pump) and In + the diagnostic socket. |
| 2. Include ignition no more than on 10 with therefore the fuel pump will start to work and will create demanded pressure in fuel system. If ignition to leave included more than on 10 with, the additional wire will strongly heat up. Check absence of leakages of fuel from fuel system. |
| 3. Switch off ignition and remove additional a wire connecting plugs of the diagnostic socket. |
|
|