KIA RIO

since 2000 of release

Repair and car operation

Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   5.1. Specifications
   5.2. Elements of fuel system
   5.3. Corner of an advancing of ignition
   5.4. Frequency of rotation of idling
   5.5. Sensor of a measuring instrument of a consumption of air
   5.6. Detonation sensor
   5.7. Sensor of provision of a butterfly valve
   5.8. Check of the main relay
   5.9. Check of the relay of the fuel pump
   5.10. Check of tension of forward and back warmed sensors of oxygen
   5.11. Check of forward and back warmed sensors of oxygen
   5.12. Pressure removal in fuel system
   5.13. Toplivoprovoda
   5.14. Activization of fuel system
   5.15. Check of residual pressure in fuel system
   5.16. Check of fuel pipelines
   5.17. Check of fuel nozzles
   5.18. Quick-detachable connections
   5.19. Fuel pump
   5.20. Fuel tank
   5.21. Check of system of ventilation of a case (PCV)
   5.22. Check of system of catching паров fuels
   5.23. Check of the valve of system of catching паров fuels
   5.24. Check of the valve of closing of the canister
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment

5.3. Corner of an advancing of ignition

PERFORMANCE ORDER

1. Tighten the parking brake.
2. Start up the engine and warm up it to working temperature.
3. Switch off everything consumers of electric energy.
4. Connect to a high-voltage wire of the first cylinder the stroboscope sensor.
	5. On combination of labels on a pulley of a cranked shaft with the index on a casing of a gear belt check a corner of an advancing of ignition. Corner of an advancing of ignition: 8±5 ° to VMT (on frequency of rotation of idling) (6±5 ° to VMT: the A5D engine for Europe)
Prevention The corner of an advancing of ignition is not regulated.
6. If the corner of an advancing of ignition is not in limits of the specified range, replace the ESM block.