KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   5.1. Specifications
   5.2. Elements of fuel system
   5.3. Corner of an advancing of ignition
   5.4. Frequency of rotation of idling
   5.5. Sensor of a measuring instrument of a consumption of air
   5.6. Detonation sensor
   5.7. Sensor of provision of a butterfly valve
   5.8. Check of the main relay
   5.9. Check of the relay of the fuel pump
   5.10. Check of tension of forward and back warmed sensors of oxygen
   5.11. Check of forward and back warmed sensors of oxygen
   5.12. Pressure removal in fuel system
   5.13. Toplivoprovoda
   5.14. Activization of fuel system
   5.15. Check of residual pressure in fuel system
   5.16. Check of fuel pipelines
   5.17. Check of fuel nozzles
   5.18. Quick-detachable connections
   5.19. Fuel pump
   5.20. Fuel tank
   5.21. Check of system of ventilation of a case (PCV)
   5.22. Check of system of catching паров fuels
   5.23. Check of the valve of system of catching паров fuels
   5.24. Check of the valve of closing of the canister
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


5.18. Quick-detachable connections

GENERAL INFORMATION

Prevention

The fuel system remains under pressure even after engine switching off therefore before a detachment of pipelines, it is necessary to remove pressure in fuel system.


Connection

PERFORMANCE ORDER
1. Pull a flange of quick-detachable connection over a pipe before its accurate fixing (click).
2. After connection of hoses pull in different directions (And and In) two parts of the quick-detachable socket and be convinced that fixing of the socket is executed reliably, thus do not press holders of connection.

Separation

PERFORMANCE ORDER
1. Remove pressure in fuel system.
2. Press a flange of quick-detachable connection in the direction A.
3. Compress both holders and separate connection, having pulled a flange in V.Pri's direction separation do not apply big efforts.