|
1. An additional wire connect FUEL PUMP plugs (the fuel pump) and In + the diagnostic socket. |
2. Uncover a toplivonalivny mouth of a fuel tank. |
3. Include ignition. |
4. Define, whether the fuel pump works, listening to noise created by the pump through a toplivonalivny mouth of a fuel tank. |
5. Connect a wire to the negative plug of the storage battery. |
Prevention
The fuel system remains under pressure even after engine switching off therefore before a detachment of pipelines, it is necessary to remove pressure in fuel system.
|
6. An additional wire connect FUEL PUMP plugs (the fuel pump) and In + the diagnostic socket. |
7. Include ignition. |
|
8. Check the maximum pressure created by the fuel pump. The maximum pressure created by the fuel pump: 450–650 kPas
|
9. If the pressure created by the fuel pump does not correspond demanded, replace the block of supply of fuel. |
|