KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   5.1. Specifications
   5.2. Elements of fuel system
   5.3. Corner of an advancing of ignition
   5.4. Frequency of rotation of idling
   5.5. Sensor of a measuring instrument of a consumption of air
   5.6. Detonation sensor
   5.7. Sensor of provision of a butterfly valve
   5.8. Check of the main relay
   5.9. Check of the relay of the fuel pump
   5.10. Check of tension of forward and back warmed sensors of oxygen
   5.11. Check of forward and back warmed sensors of oxygen
   5.12. Pressure removal in fuel system
   5.13. Toplivoprovoda
   5.14. Activization of fuel system
   5.15. Check of residual pressure in fuel system
   5.16. Check of fuel pipelines
   5.17. Check of fuel nozzles
   5.18. Quick-detachable connections
   5.19. Fuel pump
   5.20. Fuel tank
   5.21. Check of system of ventilation of a case (PCV)
   5.22. Check of system of catching паров fuels
   5.23. Check of the valve of system of catching паров fuels
   5.24. Check of the valve of closing of the canister
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


5.16. Check of fuel pipelines

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove pressure in fuel system.
3. Lift the car.
4. Connect the measuring device ОК2А1 131 001 A about the fuel filter.
5. Connect a wire to the negative plug of the storage battery.
6. An additional wire connect FUEL PUMP plugs (the fuel pump) and In + the diagnostic socket.
7. Include ignition no more than on 10 with therefore the fuel pump will start to work and will create demanded pressure in fuel system.

8. Check pressure in fuel system.


Pressure in fuel system: 320–350 kPas

If pressure exceeds demanded values:

      – check purity of the pipeline of return of fuel;
      – if the pipeline of return of fuel is not polluted, replace a pressure regulator.

If pressure is lower than demanded value:

      – close the pipeline of return of fuel and check, whether pressure raises;
      – if pressure raises, replace a pressure regulator;
      – if pressure does not raise, measure the maximum pressure created by the fuel pump.
9. Switch off ignition and remove additional a wire connecting plugs of the diagnostic socket.