KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   5.1. Specifications
   5.2. Elements of fuel system
   5.3. Corner of an advancing of ignition
   5.4. Frequency of rotation of idling
   5.5. Sensor of a measuring instrument of a consumption of air
   5.6. Detonation sensor
   5.7. Sensor of provision of a butterfly valve
   5.8. Check of the main relay
   5.9. Check of the relay of the fuel pump
   5.10. Check of tension of forward and back warmed sensors of oxygen
   5.11. Check of forward and back warmed sensors of oxygen
   5.12. Pressure removal in fuel system
   5.13. Toplivoprovoda
   5.14. Activization of fuel system
   5.15. Check of residual pressure in fuel system
   5.16. Check of fuel pipelines
   5.17. Check of fuel nozzles
   5.18. Quick-detachable connections
   5.19. Fuel pump
   5.20. Fuel tank
   5.21. Check of system of ventilation of a case (PCV)
   5.22. Check of system of catching паров fuels
   5.23. Check of the valve of system of catching паров fuels
   5.24. Check of the valve of closing of the canister
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


5.23. Check of the valve of system of catching паров fuels

PERFORMANCE ORDER
1. Disconnect vacuum hoses from the catching valve паров fuels (EVAR) and blow it.
2. Be convinced that air does not pass through the valve.
3. Disconnect from the valve the socket and additional wires connect the valve to the storage battery, as is shown in drawing.
4. The compressed air blow the valve.
5. If air does not pass through the valve, replace it.
6. Connect to the valve the socket.
7. Connect to the valve vacuum hoses.