KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
- 16. Electric equipment
   16.1. Specifications
   16.2. Electric chains
   - 16.3. Generator
      16.3.1. Generator check
      16.3.2. Belt of a drive of the generator
      16.3.3. Removal, repair and generator installation
   + 16.4. Storage battery
   16.5. Starter
   16.6. Check at a provorachivaniye of a cranked shaft not the heated-up engine
   16.7. Check of an electric chain of the traction relay
   16.8. Check of the traction relay
   16.9. Check of brushes and shchetkoderzhatel
   16.10. Check of coils of a stator
   16.11. Rotor check
   16.12. Removal and starter installation
   16.13. Starter repair
   16.14. Multipurpose switch
   16.15. Sound signal
   16.16. The block of safety locks and the relay, established in car salon
   16.17. Check of the relay of the activator of the lock of a door
   16.18. Check of the switch of adjustment of provision of an external rear-view mirror
   16.19. Check of the activator of provision of an external rear-view mirror
   16.20. Check of the engine of a window regulator
   16.21. Check of a heater of back glass
   16.22. Repair of a current-carrying strip of a heater
   16.23. Engine of a screen wiper of a windscreen
   16.24. Stekloomyvateli
   16.25. Adjustment of light of headlights
   16.26. Adjustment of light of fog lights
   16.27. Safety cushions (SRS)
   16.28. Precautionary labels
   16.29. Safety cushion of the driver and spiral wire
   16.30. Safety cushion check
   16.31. Check of a spiral wire (spring)
   16.32. Safety cushion of the forward passenger
   + 16.33. Electric circuits





16.3.2. Belt of a drive of the generator

Tension check

PERFORMANCE ORDER
1. Check a condition of a belt of a drive of the generator and a pulley on lack of wear, cracks and damages. If necessary, replace a belt of a drive of the generator and / or a pulley.
2. By the special device measure a tension of a belt of a drive of the generator.

Tension of a belt of a drive of the generator:
New belt: 383–461 N
The belt which was in the use: 304–383 N
Tension of a belt of a drive of the generator and conditioner:
New belt: 491-589H
The belt which was in the use: 422-491H

3. In the absence of the special device check a belt tension, having pressed on it effort of 98 N (10 kg) in a place located on identical removal from pulleys and measure a belt deflection.

Deflection of a belt of a drive of the generator
New 8–9 mm
9–10 mm which were in the use