KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Check of the vacuum amplifier of brakes with use of devices
   13.3. Unilateral vacuum valve
   13.4. Vacuum amplifier of brakes
   13.5. Pumping of hydraulic system of a drive of brakes
   13.6. Check of brake tubes
   13.7. Check and replacement of brake hoses
   + 13.8. Brake pedal
   13.9. Replacement of forward brake shoes
   13.10. Replacement of brake shoes on back drum-type brakes
   13.11. Repair of a support of a forward brake
   13.12. Repair of the working brake cylinder
   13.13. Main brake cylinder
   13.14. Pressure limiter
   13.15. Parking brake
   13.16. ABS control unit
   13.17. Block of hydraulic management (HCU)
   13.18. Forward sensor of frequency of rotation of a wheel
   13.19. Back sensor of frequency of rotation of a wheel
   + 13.20. Gear rotor of the sensor of frequency of rotation of a wheel
   13.21. Main survey
   13.22. Check of functionality
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


13.1. Specifications

GENERAL INFORMATION

Name
Value
Brake pedal transfer relation
4,15:1
course, mm
127
Main brake cylinder

type
tandemny
internal diameter, mm
22,22
Forward brakes type
disk, ventilated
diameter of the cylinder, mm
54
thickness of brake shoes, mm
10,0
thickness of a brake disk, mm
22
diameter of a brake disk, mm
235
Back drum-type brakes diameter of the cylinder, mm
17,46
thickness of brake shoes, mm
5
width of brake shoes, mm
30
internal diameter of a brake drum, mm
200
Vacuum amplifier of brakes diameter, mm
CBS: 229 ABS:179–203
Brake liquid
SAE J1703 or FMVSS 116, DOT–3, DOT–4
Anti-blocking system of brakes (ABS) system
MGH–20
type
with 4 sensors and 4 channels
ABS control unit tension, In
10–16
working temperature, °C
40–110
ABS sensors type
electromagnetic, induction
resistance, kiloohm
1,3–1,5
air gap, mm
0,7±0,4
Control lamp of ABS, EBD tension, In
12
consumed current, mА
<200