KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Check of the vacuum amplifier of brakes with use of devices
   13.3. Unilateral vacuum valve
   13.4. Vacuum amplifier of brakes
   13.5. Pumping of hydraulic system of a drive of brakes
   13.6. Check of brake tubes
   13.7. Check and replacement of brake hoses
   + 13.8. Brake pedal
   13.9. Replacement of forward brake shoes
   13.10. Replacement of brake shoes on back drum-type brakes
   13.11. Repair of a support of a forward brake
   13.12. Repair of the working brake cylinder
   13.13. Main brake cylinder
   13.14. Pressure limiter
   13.15. Parking brake
   13.16. ABS control unit
   13.17. Block of hydraulic management (HCU)
   13.18. Forward sensor of frequency of rotation of a wheel
   13.19. Back sensor of frequency of rotation of a wheel
   + 13.20. Gear rotor of the sensor of frequency of rotation of a wheel
   13.21. Main survey
   13.22. Check of functionality
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment


13.21. Main survey

GENERAL INFORMATION

Step
Visual check
Elimination method
1 Check, whether the parking brake properly works. Look the following step. Yes Look the following step.
No – repair or replace the cable / lever of the parking brake;
– check operability of the switch of the parking brake;
– check operation of the parking brake;
– rotate an adjusting nut.
2 Check level of brake liquid in a compensatory tank of brake system which should be between "Max" and "Min" labels. Yes Look the following step.
No Add brake liquid.
3 Check brake tubes, hoses and their connections on absence of leaks Yes If necessary, replace the corresponding details.
No Look the following step.
4

Check properly the ABS fuse (30A):

– break or zakorachivaniye;
– reliability of connection.

Yes Look the following step.
No Replace a safety lock
5 Check reliability of connection of components of brake system:
– sensor of frequency of rotation of a wheel;
– block of hydraulic management (ABS);
– condition of a compensatory tank of brake system;
– switch of stoplights;
– ABS block.
Yes Check functioning.
No Connect a checked component.
Repair or replace a faulty component.