KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Check of the vacuum amplifier of brakes with use of devices
   13.3. Unilateral vacuum valve
   13.4. Vacuum amplifier of brakes
   13.5. Pumping of hydraulic system of a drive of brakes
   13.6. Check of brake tubes
   13.7. Check and replacement of brake hoses
   + 13.8. Brake pedal
   13.9. Replacement of forward brake shoes
   13.10. Replacement of brake shoes on back drum-type brakes
   13.11. Repair of a support of a forward brake
   13.12. Repair of the working brake cylinder
   13.13. Main brake cylinder
   13.14. Pressure limiter
   13.15. Parking brake
   13.16. ABS control unit
   13.17. Block of hydraulic management (HCU)
   13.18. Forward sensor of frequency of rotation of a wheel
   13.19. Back sensor of frequency of rotation of a wheel
   + 13.20. Gear rotor of the sensor of frequency of rotation of a wheel
   13.21. Main survey
   13.22. Check of functionality
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment





13.12. Repair of the working brake cylinder

GENERAL INFORMATION

Working brake cylinder

1–dustproof cap;
2–pumping union;
3–dustproof cover;
4–piston;
5–sealing ring;
6–sealing ring of the piston;
7–case of the working brake cylinder;
8–spring;
9–sealing ring of the piston;
10-piston;
11-dustproof cover.

Dismantling

PERFORMANCE ORDER
1. Remove dustproof covers from two parties of the working brake cylinder.
2. Pushing via the case of the working brake cylinder remove pistons and a spring.
3. Remove from pistons sealing rings.
4. Remove a dustproof cap, turn out the union of pumping and take a steel ball.

Prevention

Do not use oil, solvent, kerosene or gasoline for cleaning of details of the working brake cylinder. At their use as clearing means, their remains can remain on details and further damage rubber consolidations.


5. Wash out support details in pure denatured alcohol and drain them a stream of the compressed air.

Assembly

PERFORMANCE ORDER
1. Establish on pistons sealing rings.
2. Grease all internal details with pure brake liquid.
3. Establish a spring, pistons and dustproof covers.
4. Establish a steel ball, screw the union of pumping and establish a dustproof cap.