KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Check of the vacuum amplifier of brakes with use of devices
   13.3. Unilateral vacuum valve
   13.4. Vacuum amplifier of brakes
   13.5. Pumping of hydraulic system of a drive of brakes
   13.6. Check of brake tubes
   13.7. Check and replacement of brake hoses
   + 13.8. Brake pedal
   13.9. Replacement of forward brake shoes
   13.10. Replacement of brake shoes on back drum-type brakes
   13.11. Repair of a support of a forward brake
   13.12. Repair of the working brake cylinder
   13.13. Main brake cylinder
   13.14. Pressure limiter
   13.15. Parking brake
   13.16. ABS control unit
   13.17. Block of hydraulic management (HCU)
   13.18. Forward sensor of frequency of rotation of a wheel
   13.19. Back sensor of frequency of rotation of a wheel
   + 13.20. Gear rotor of the sensor of frequency of rotation of a wheel
   13.21. Main survey
   13.22. Check of functionality
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment





13.22. Check of functionality

GENERAL INFORMATION

Step
Visual check
Elimination method
1 Check that the control lamp of ABS burns within 2–3 seconds after ignition inclusion. Yes Look the following step.
No Check a control lamp of ABS and a plait of wires
2 Check, whether the lamp of the parking brake is switched off at an otpuskaniye of the lever of the parking brake.
Check that the control lamp burns within 2–3 seconds after inclusion of ignition and the released parking brake.
Yes Look the following step.
No – check level of brake liquid;
– check on absence of leaks brake tubes and hoses, the working brake cylinder and the main brake cylinder;
– the control lamp of EBD can include a control lamp of ABS if ABS has defects;
– at the released parking brake the control lamp can periodically light up at the included ignition.
3 The diagnostic device check the codes of malfunctions written down in memory. Yes Execute the corresponding check.
No Look the following step.
4 After a trip and check of the codes of malfunctions written down in memory return to a step 3. Yes Execute the corresponding check.
No – check reliability of connection of sockets;
– system as it should be.