KIA RIO

since 2000 of release

Repair and car operation

Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Check of the vacuum amplifier of brakes with use of devices
   13.3. Unilateral vacuum valve
   13.4. Vacuum amplifier of brakes
   13.5. Pumping of hydraulic system of a drive of brakes
   13.6. Check of brake tubes
   13.7. Check and replacement of brake hoses
   + 13.8. Brake pedal
   13.9. Replacement of forward brake shoes
   13.10. Replacement of brake shoes on back drum-type brakes
   13.11. Repair of a support of a forward brake
   13.12. Repair of the working brake cylinder
   13.13. Main brake cylinder
   13.14. Pressure limiter
   13.15. Parking brake
   13.16. ABS control unit
   13.17. Block of hydraulic management (HCU)
   13.18. Forward sensor of frequency of rotation of a wheel
   13.19. Back sensor of frequency of rotation of a wheel
   + 13.20. Gear rotor of the sensor of frequency of rotation of a wheel
   13.21. Main survey
   13.22. Check of functionality
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment

13.7. Check and replacement of brake hoses

Check

Check brake hoses on lack of cracks and a local vspuchivaniye. If necessary replace a brake hose.

Removal

PERFORMANCE ORDER

	1. A special key OK130 430 019 unscrew a connecting nut of a brake tube from a hose.
2. Release a clip and remove a brake hose from an arm.

Installation

PERFORMANCE ORDER

1. Establish a brake hose in an arm and fix it a clip.
	2. Connect a brake hose to a brake tube and a special key OK130 430 019 tighten a connecting nut.
Prevention Check that the brake hose is not bent. Check that the brake hose does not concern other details of the car at turn of a steering wheel from an emphasis against the stop or when rocking a body of the car. Inhaling moment: 1322 N • m
	3. Several times press a pedal of a brake and check absence of leaks from a brake hose and its connection with a brake tube.
4. Check level of brake liquid which should be between MAX and MIN labels located on a wall of a transparent popolnitelny tank.
5. Remove air from hydraulic system of a drive of brakes.