KIA RIO

since 2000 of release

Repair and car operation


Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Check of the vacuum amplifier of brakes with use of devices
   13.3. Unilateral vacuum valve
   13.4. Vacuum amplifier of brakes
   13.5. Pumping of hydraulic system of a drive of brakes
   13.6. Check of brake tubes
   13.7. Check and replacement of brake hoses
   - 13.8. Brake pedal
      13.8.1. Height of installation of a pedal of a brake
      13.8.2. Free wheeling of a pedal of a brake
      13.8.3. Distance of a pedal of a brake from a floor
   13.9. Replacement of forward brake shoes
   13.10. Replacement of brake shoes on back drum-type brakes
   13.11. Repair of a support of a forward brake
   13.12. Repair of the working brake cylinder
   13.13. Main brake cylinder
   13.14. Pressure limiter
   13.15. Parking brake
   13.16. ABS control unit
   13.17. Block of hydraulic management (HCU)
   13.18. Forward sensor of frequency of rotation of a wheel
   13.19. Back sensor of frequency of rotation of a wheel
   + 13.20. Gear rotor of the sensor of frequency of rotation of a wheel
   13.21. Main survey
   13.22. Check of functionality
+ 14. Body
+ 15. Air central air
+ 16. Electric equipment

13.8.2. Free wheeling of a pedal of a brake

Check

PERFORMANCE ORDER
1. With the switched-off engine press a brake pedal several times to clean depression in the vacuum amplifier of brakes.
2. A hand press a brake pedal before emergence of notable resistance and measure a free wheeling of a pedal.

Free wheeling of a pedal of a brake: 47 mm

Adjustment

PERFORMANCE ORDER
1. Weaken a lock-nut of D and, rotating a pusher of C, adjust a free wheeling of a pedal of a brake.
2. Check height of installation of a pedal of a brake and work of stop signals.

3. Tighten a lock-nut of D.

Inhaling moment: 23,534,3 N • m

4. Check height of installation of a pedal of a brake and action of stop signals