KIA RIO

since 2000 of release

Repair and car operation



Rio KIA
+ 1.1. Short acquaintance to the car
+ 2. Engines A3E, A5D
+ 3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmission
+ 9. Axes and power shafts
+ 10. Suspension bracket
+ 11. Wheels and tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Air central air
- 16. Electric equipment
   16.1. Specifications
   16.2. Electric chains
   + 16.3. Generator
   - 16.4. Storage battery
      16.4.1. Normal charging of the storage battery
      16.4.2. The accelerated charging of the storage battery
      16.4.3. Check of the storage battery
      16.4.4. Check of level of electrolit
      16.4.5. Check of density of electrolit
      16.4.6. Check of tension of the storage battery
      16.4.7. Check of tension of the storage battery under loading
      16.4.8. Check of the current consumed from the storage battery at switched-off ignition
      16.4.9. Power failure check on connections of plugs of the storage battery
   16.5. Starter
   16.6. Check at a provorachivaniye of a cranked shaft not the heated-up engine
   16.7. Check of an electric chain of the traction relay
   16.8. Check of the traction relay
   16.9. Check of brushes and shchetkoderzhatel
   16.10. Check of coils of a stator
   16.11. Rotor check
   16.12. Removal and starter installation
   16.13. Starter repair
   16.14. Multipurpose switch
   16.15. Sound signal
   16.16. The block of safety locks and the relay, established in car salon
   16.17. Check of the relay of the activator of the lock of a door
   16.18. Check of the switch of adjustment of provision of an external rear-view mirror
   16.19. Check of the activator of provision of an external rear-view mirror
   16.20. Check of the engine of a window regulator
   16.21. Check of a heater of back glass
   16.22. Repair of a current-carrying strip of a heater
   16.23. Engine of a screen wiper of a windscreen
   16.24. Stekloomyvateli
   16.25. Adjustment of light of headlights
   16.26. Adjustment of light of fog lights
   16.27. Safety cushions (SRS)
   16.28. Precautionary labels
   16.29. Safety cushion of the driver and spiral wire
   16.30. Safety cushion check
   16.31. Check of a spiral wire (spring)
   16.32. Safety cushion of the forward passenger
   + 16.33. Electric circuits


16.4.7. Check of tension of the storage battery under loading

PERFORMANCE ORDER
1. Disconnect wires from the storage battery. The negative wire is necessary for disconnecting first of all and to connect in the last turn. Check that the top part and plugs of the storage battery pure.
2. By the digital voltmeter measure tension on plugs of the storage battery. Be convinced that tension shown by the digital voltmeter makes 12,4 In or more.
3. On 15 with connect to plugs of the storage battery loading with a consumed current 300 And, then wait for 5 mines for stabilization of tension of the storage battery.
4. Connect to plugs of the storage battery loading with a consumed current of equal 50 % from battery capacity, through 15 with measure tension and disconnect loading.
5. Tension of the storage battery changes depending on battery temperature at carrying out check.

Temperature of the storage battery, °C
The minimum tension, In
27
9,7
21
9,6
15
9,5
10
9,4
4
9,3
– 1
9,1
– 7
8,9
– 12
8,7